1,153 → 1,212 |
1.12: (2010-04-10) |
* New features/tweaks: |
- Loading of random configuration files (--config / -C) |
- Profiles: Similar to above but simpler syntax (--profile / -p) |
- Config/Profile generation from command-line (--generate) |
- Adapt heading, title and footer height to font size (fonts that used |
to get cropped should now be fine) |
* DVD mode cleanup: |
- Command-line switched to match "normal" files: |
Before: |
$ vcs --dvd /dev/dvd 0 or $ vcs -dvd /dev/dvd 1 |
Equivalents now: |
$ vcs --dvd /dev/dvd or $ vcs --dvd --dvd-title 1 /dev/dvd |
* New end-offset behaviour: |
- A 5.5% end offset is applied by default |
- Can be disabled with -E0 or end_offset=0 |
- MIN_LENGTH_FOR_END_OFFSET is no longer used |
* Configuration files cleanup: |
- Simplified or more meaningful names where appropriate (the older |
names will continue to work for a while, and users will be warned) |
"vcs --generate" with no other arguments can be used to translate them |
- Validation of configuration options. |
Incorrect values will be discarded and an error shown; processing will |
continue. |
- Configuration searched in ~/.vcs/vcs.conf too |
- Syntax enhancements: |
> Comments can now be included in-line |
> Putting '#' in a value now requires using the "escaped form" '$#' |
> Semicolons (;) also serve to start comments: When one is found the |
rest of the line is ignored, they continue to be disallowed in values |
i.e. 'tl;dr' will be parsed as 'tl' |
* Other: |
- Accept timecodes and percentages in end_offset, both from the |
command-line and in configuration files |
- Print the start and end timestamps in effect before capturing |
- No longer accept interval zero (used to be re-set to default) |
- Tighter printing of overrides and no longer printed as warning |
- Strickter handing of wrong options |
- Fall back to Helvetica also when no fonts dir is located. Look |
in /usr/local too. |
- --end-offset added as an alias to --end_offset |
- Starting with 1.12 a tarball + makefile is also provided |
* BUGFIXES: |
- Avoid possible (unlikely) usage of scientific notation in internal |
calculations |
- Distinguish between default end offset and user's end offset with the |
same value |
- Handle --nonlatin correctly |
- DVD Mode + FFmpeg identification: Check VOB #0 instead of #1 |
- Don't print escape codes to stdout when testing colour printing |
* Options removed: |
--shoehorn, temporary replacement: --undocumented shoehorn. Will be gone |
in 1.13 |
--mincho, replaced by --nonlatin since 1.11 |
MIN_LENGTH_FOR_END_OFFSET, as explained above, no longer needed |
* INTERNAL: |
- $CFGFILE replaced by ~/.vcs.conf |
- Use -p for profiles instead of -P (used, undocumented, in 1.11) |
|
1.11.2: (2010-03-19) |
* Added Cook and Sipro (RealAudio 4, 5 & 6) codecs |
* BUGFIXES: |
- Remove extra, empty, temporary dir |
- Use standard awk syntax for exponentiation (pyth_th) |
- Workaround for systems that don't register fonts with ImageMagick |
* DEBUG: Print to stderr when probbing with mplayer too |
* Added Cook and Sipro (RealAudio 4, 5 & 6) codecs |
* BUGFIXES: |
- Remove extra, empty, temporary dir |
- Use standard awk syntax for exponentiation (pyth_th) |
- Workaround for systems that don't register fonts with ImageMagick |
* DEBUG: Print to stderr when probbing with mplayer too |
|
1.11.1: (2010-03-11) |
* Added FLV1 codec |
* BUGFIXES: |
- Deprecate DEFAULT_INTERVAL, DEFAULT_NUMCAPS and DEFAULT_COLS as |
overrides, warn about their new names (interval, numcaps and cols) |
- Fix ImageMagick version detection |
* Added FLV1 codec |
* BUGFIXES: |
- Deprecate DEFAULT_INTERVAL, DEFAULT_NUMCAPS and DEFAULT_COLS as |
overrides, warn about their new names (interval, numcaps and cols) |
- Fix ImageMagick version detection |
|
1.11: (2010-03-07) |
* FEATURES |
- Allow setting output filename. With extension will set output format, |
without will inherit it. |
- Allow percentages in height. |
- Require mplayer OR ffmpeg instead of both. Having both is still |
recommended for better results. |
- Safe mode, for files whose length doesn't get reported correctly. |
Completely automated. |
Number of tries can be increased with -Ws. Repeat to increase further. |
Use -WS to do try as many times as possible. |
Accuracy (stepping) can be increased with -Wp. Repeat to increase |
accuracy. Decrease with -WP. |
Can be deliberately disabled with -Wb to force processing of broken |
files. *VCS WITH -Wb WILL FAIL ON BROKEN FILES* |
- Added -dp (--disable padding) equivalent to overriding HPAD to 0 |
* BUGFIXES: |
- Don't pass ms to mplayer. It ignores them anyway and in some rare |
cases breaks the last capture (possibly due to the 5-frames hack) |
- Honor detected aspect ratio if found |
- Try to detect files that might fail on the last capture and trigger |
safe mode |
- Timestamps font was being ignored. As a side effect this produced |
italiced timestamps in some systems |
- Fixed obscure bug with safe_rename_pattern overrides |
* COMPAT: Support for bash 2.05b. This will (probably) be the last version |
capable of running under bash 2. |
* DVD mode revamp |
- Print title file size instead of disc size when possible |
- Aspect ratio detection, if available |
- Use of FFmpeg if available to get better information |
- Mostly x-platform, only ISOs identification is a bit better in Linux |
* Added FourCCs: 3IV1, 3IV2 (3ivx); s263 (H.263); mp4v, MP4V, H264 |
(MPEG-4 and AVC in mov/mp4), VP6F (VP6 Flash Version), AMR |
Video codec renamings: |
- TechSmith codec name shortened to TechSmith SCC |
- Raw RGB renamed to Raw video |
* Help cleanup. The default help output is much shorter, the full text |
can be displayed with --fullhelp. Also print the decoder choice near |
the appropriate option (-M/-F) |
* Added --anonymous to help (never was in it) |
* Drop requirement on seq/jot and bc, replaced by inline awk |
... New requirement: Perl (only for DVDs). |
* Adopt new/fixed numbering scheme |
<http://p.outlyer.net/dox/vcs:devel:renumbering> |
* Check ImageMagick version (must decide which is the real minimum |
required) |
* Non-latin fonts revamp: |
- -I no longer works alone (use -Ij or -Ik instead) |
- -Ik, -Ij and --nonlatin try to pick an appropriate font automatically |
- -I accepts a font name or font filename like |
-Ij=Kochi-Mincho-Regular or |
-Ij=/usr/share/fonts/truetype/kochi/kochi-mincho.ttf |
* Deprecated options: |
--shoehorn: Will be removed unless someone really needs it. |
--mincho: Replaced by --nonlatin |
* COSMETIC: |
- Default font switched to DejaVu Sans. |
Font sizes reduced to accomodate the new default. |
Should fall back to a sane default if it's not available |
- Much tighter padding |
- Smaller timestamps font by default |
- Print friendlier timestamp when a capture fails |
- Print program signature to console without colour |
- Use main font by default in timestamps |
- Heading background colour toned down |
- Added colourised output when tput is not capable (i.e. FreeBSD) |
- Added prefixes when colour is not available for console output |
- Don't print lsdvd error channel is DVD mode |
- Suppress mv errors (e.g. over VFS being unable to preserve) |
* Minimum ImageMagick version set to 6.3.5-7 |
* Better detection of requirements (e.g. disallow decoders without png |
support) |
* Allow overriding height, number of captures, interval, columns, and |
padding |
* UNDOCUMENTED/DEBUG: |
- Allow stopping the main loop before cleaning up (--undocumented hang) |
- Identification-only mode. Might be promoted to an actual feature |
(--undocumented idonly) |
- Allow setting ffmpeg and mplayer path (--undocumented set_ffmpeg and |
set_mplayer) |
- Allow disabling either mplayer of ffmpeg (as if they weren't |
installed (--undocumented disable_ffmpeg and disable_mplayer) |
- Added -Wc to disable console colour, repeat to disable prefixes |
* INTERNAL: |
- assert() |
- Cleanup: correctness checks converted to asserts, removal of old dead |
code |
- Typos |
* FEATURES |
- Allow setting output filename. With extension will set output format, |
without will inherit it. |
- Allow percentages in height. |
- Require mplayer OR ffmpeg instead of both. Having both is still |
recommended for better results. |
- Safe mode, for files whose length doesn't get reported correctly. |
Completely automated. |
Number of tries can be increased with -Ws. Repeat to increase further. |
Use -WS to do try as many times as possible. |
Accuracy (stepping) can be increased with -Wp. Repeat to increase |
accuracy. Decrease with -WP. |
Can be deliberately disabled with -Wb to force processing of broken |
files. *VCS WITH -Wb WILL FAIL ON BROKEN FILES* |
- Added -dp (--disable padding) equivalent to overriding HPAD to 0 |
* BUGFIXES: |
- Don't pass ms to mplayer. It ignores them anyway and in some rare |
cases breaks the last capture (possibly due to the 5-frames hack) |
- Honor detected aspect ratio if found |
- Try to detect files that might fail on the last capture and trigger |
safe mode |
- Timestamps font was being ignored. As a side effect this produced |
italiced timestamps in some systems |
- Fixed obscure bug with safe_rename_pattern overrides |
* COMPAT: Support for bash 2.05b. This will (probably) be the last version |
capable of running under bash 2. |
* DVD mode revamp |
- Print title file size instead of disc size when possible |
- Aspect ratio detection, if available |
- Use of FFmpeg if available to get better information |
- Mostly x-platform, only ISOs identification is a bit better in Linux |
* Added FourCCs: 3IV1, 3IV2 (3ivx); s263 (H.263); mp4v, MP4V, H264 |
(MPEG-4 and AVC in mov/mp4), VP6F (VP6 Flash Version), AMR |
Video codec renamings: |
- TechSmith codec name shortened to TechSmith SCC |
- Raw RGB renamed to Raw video |
* Help cleanup. The default help output is much shorter, the full text |
can be displayed with --fullhelp. Also print the decoder choice near |
the appropriate option (-M/-F) |
* Added --anonymous to help (never was in it) |
* Drop requirement on seq/jot and bc, replaced by inline awk |
... New requirement: Perl (only for DVDs). |
* Adopt new/fixed numbering scheme |
<http://p.outlyer.net/dox/vcs:devel:renumbering> |
* Check ImageMagick version (must decide which is the real minimum |
required) |
* Non-latin fonts revamp: |
- -I no longer works alone (use -Ij or -Ik instead) |
- -Ik, -Ij and --nonlatin try to pick an appropriate font automatically |
- -I accepts a font name or font filename like |
-Ij=Kochi-Mincho-Regular or |
-Ij=/usr/share/fonts/truetype/kochi/kochi-mincho.ttf |
* Deprecated options: |
--shoehorn: Will be removed unless someone really needs it. |
--mincho: Replaced by --nonlatin |
* COSMETIC: |
- Default font switched to DejaVu Sans. |
Font sizes reduced to accomodate the new default. |
Should fall back to a sane default if it's not available |
- Much tighter padding |
- Smaller timestamps font by default |
- Print friendlier timestamp when a capture fails |
- Print program signature to console without colour |
- Use main font by default in timestamps |
- Heading background colour toned down |
- Added colourised output when tput is not capable (i.e. FreeBSD) |
- Added prefixes when colour is not available for console output |
- Don't print lsdvd error channel is DVD mode |
- Suppress mv errors (e.g. over VFS being unable to preserve) |
* Minimum ImageMagick version set to 6.3.5-7 |
* Better detection of requirements (e.g. disallow decoders without png |
support) |
* Allow overriding height, number of captures, interval, columns, and |
padding |
* UNDOCUMENTED/DEBUG: |
- Allow stopping the main loop before cleaning up (--undocumented hang) |
- Identification-only mode. Might be promoted to an actual feature |
(--undocumented idonly) |
- Allow setting ffmpeg and mplayer path (--undocumented set_ffmpeg and |
set_mplayer) |
- Allow disabling either mplayer of ffmpeg (as if they weren't |
installed (--undocumented disable_ffmpeg and disable_mplayer) |
- Added -Wc to disable console colour, repeat to disable prefixes |
* INTERNAL: |
- assert() |
- Cleanup: correctness checks converted to asserts, removal of old dead |
code |
- Typos |
|
1.0.100a: (2009-04-10) (1.10) |
* FEATURE: FreeBSD (7.1-RELEASE) support |
* COMPATIBILITY: |
- Call bash through env |
- Ensure we're using the correct getopt version |
- Try to use POSIX sed options when appropriate |
- Replaced incompatible sed constructs |
- Use mktemp's common GNU/BSD(/POSIX?) syntax |
- Use jot instead of seq if required and available |
* BUGFIX: Don't fail if tput is unable to change colours |
* BUGFIX: Check for requirements before anything else |
* INTERNAL: Cache tput output |
* FEATURE: Added -R / --randomsource. Mainly useful for debugging, |
also to repeat a set of results and compare outputs on different |
systems |
* Corrected info message in photos mode |
* FEATURE: FreeBSD (7.1-RELEASE) support |
* COMPATIBILITY: |
- Call bash through env |
- Ensure we're using the correct getopt version |
- Try to use POSIX sed options when appropriate |
- Replaced incompatible sed constructs |
- Use mktemp's common GNU/BSD(/POSIX?) syntax |
- Use jot instead of seq if required and available |
* BUGFIX: Don't fail if tput is unable to change colours |
* BUGFIX: Check for requirements before anything else |
* INTERNAL: Cache tput output |
* FEATURE: Added -R / --randomsource. Mainly useful for debugging, |
also to repeat a set of results and compare outputs on different |
systems |
* Corrected info message in photos mode |
|
1.0.99: (2009-03-11) (1.9) |
* FEATURE: Experimental support for DVDs (-V) |
* FEATURE: Added JPEG 2000 output format (-j2) |
* FEATURE/COSMETIC: Polaroid mode now produces a polaroid-like frame, the |
older version is now renamed as simply 'photos' |
New "funky" modes: newer polaroid, photos (older polaroid), |
polaroidframe |
* Overrideable variables: DISABLE_SHADOWS and DISABLE_TIMESTAMPS (set to 1 |
to disable) |
* BUGFIX/COSMETIC: Re-added the missed space before filename |
* BUGFIX/COSMETIC: Reworked alignment and padding |
* Timestamps size is adjusted with smaller captures |
* BUGFIX: Fixed polaroid/rotate bug where all images overlapped on the same |
position (reported by Aleksandar Urošević, formerly unreproducible) |
* Better detection of video/audio features by falling back to ffmpeg when |
* FEATURE: Experimental support for DVDs (-V) |
* FEATURE: Added JPEG 2000 output format (-j2) |
* FEATURE/COSMETIC: Polaroid mode now produces a polaroid-like frame, the |
older version is now renamed as simply 'photos' |
New "funky" modes: newer polaroid, photos (older polaroid), |
polaroidframe |
* Overrideable variables: DISABLE_SHADOWS and DISABLE_TIMESTAMPS (set to 1 |
to disable) |
* BUGFIX/COSMETIC: Re-added the missed space before filename |
* BUGFIX/COSMETIC: Reworked alignment and padding |
* Timestamps size is adjusted with smaller captures |
* BUGFIX: Fixed polaroid/rotate bug where all images overlapped on the same |
position (reported by Aleksandar Urošević, formerly unreproducible) |
* Better detection of video/audio features by falling back to ffmpeg when |
appropriate |
|
1.0.12: (2008-04-16) (1.8) |
* BUGFIX/COSMETIC: Corrected 0ms timestamps |
* COSMETIC: Re-added the (disabled for long) black border after highlights |
* BUGFIX/COSMETIC: Corrected the count of captures in manual-only mode (-m) |
* FEATURE: Added a minimun length to use the end offset |
* BUGFIX: Fixed the regression on highlights from the last version (extra |
padding was being added by IM automatically) |
* INTERNAL: Simplified use of IM's identify |
* BUGFIX: Fixed parsing of manual timestamps including milliseconds |
(when seconds didn't include the s character they were accidentally |
multiplied by 10!) |
* BUGFIX/COSMETIC: Corrected 0ms timestamps |
* COSMETIC: Re-added the (disabled for long) black border after highlights |
* BUGFIX/COSMETIC: Corrected the count of captures in manual-only mode (-m) |
* FEATURE: Added a minimun length to use the end offset |
* BUGFIX: Fixed the regression on highlights from the last version (extra |
padding was being added by IM automatically) |
* INTERNAL: Simplified use of IM's identify |
* BUGFIX: Fixed parsing of manual timestamps including milliseconds |
(when seconds didn't include the s character they were accidentally |
multiplied by 10!) |
|
1.0.11: (2008-04-08) (1.7) |
* BUGFIX: (brown bag bug) Corrected typo in variable name that made vcs |
157,7 → 216,7 |
* WORKAROUND: Fix for all-equal captures (seems to be a known problem |
with mplayer [M1]) (contributed by Phil Grundig) |
* RETROCOMPATIBILITY: Older bash syntax for appending and initialising |
arrays (contributed by Phil Grundig) |
arrays (contributed by Phil Grundig) |
* COMPATIBILITY: Support alternative du syntax for compatibility with |
busybox (based on Phil Grundig's contribution) |
* COSMETIC: Don't print milliseconds when using mplayer as capturer |
170,40 → 229,40 |
to 1) |
* Added FOURCC for VC-1 |
* COSMETIC: Fixed captures recount with multiple files (prompted by a |
bugreport from Dougn Redhammer) |
bugreport from Dougn Redhammer) |
|
1.0.10: (2007-11-08) (1.6) |
* BUGFIX: Corrected aspect guessing bug: would fail if width was standard |
but height not |
but height not |
* FEATURE: Allow explicitly disabling timestamps (-dt or --disable |
timestamps) |
timestamps) |
* FEATURE: Allow explicitly disabling shadows (-ds or --disable shadows) |
* Added HD resolution guessed aspect ratio (defaults to 16/9) |
* OTHER: Changed e-mail address in the comments to gmail's, would probably |
get a quicker response. |
get a quicker response. |
|
1.0.9a: (2007-06-10) (1.5.2, -Brown bag- Bugfix release) |
* BUGFIX: Fixed regression introduced in 1.0.8a: unsetting numcols |
broke extended mode captures (Thanks to 'Aleksandar Urošević'). |
broke extended mode captures (Thanks to 'Aleksandar Urošević'). |
* BUGFIX: Use the computed number of columns for extended mode |
(instead of the global one) |
(instead of the global one) |
|
1.0.8a: (2007-06-02) (1.5.1, Bugfix release) |
* BUGFIX: User set number of columns wasn't being used if -n wasn't used |
(Thanks to 'Homer S'). |
(Thanks to 'Homer S'). |
* BUGFIX: Right side of heading wasn't using the user's font colour |
(Thanks to 'Dougn Redhammer'). |
(Thanks to 'Dougn Redhammer'). |
|
1.0.7a: (2007-05-12) (1.5) |
* Print title *before* the highlights. |
* Added the forgotten -O and -c to the help text (oops!) |
* Experimental: Allow using non-latin alphabets by switching font. See -I. |
It only affects the filename! Also allow overriding the font to be used |
to print the filename ($font_filename). Right now only using a Mincho font, |
it can be overriding by overriding $FONT_MINCHO. |
It only affects the filename! Also allow overriding the font to be used |
to print the filename ($font_filename). Right now only using a Mincho |
font, it can be overriding by overriding $FONT_MINCHO. |
* Make title font size independent of the timestamps size. And allow |
overriding the title font ($font_title), font size ($pts_title) |
and colours ($fg_title and $bg_title). |
overriding the title font ($font_title), font size ($pts_title) |
and colours ($fg_title and $bg_title). |
* Allow overriding the previews' background ($bg_contact) |
* Added getopt, identify, sed, grep and egrep to the checked programs |
* BUGFIX: Corrected test of accepted characters for intervals |
210,11 → 269,11 |
* INTERNAL: New parsing code |
* FEATURE: Replaced hard by soft shadows |
* BUGFIX: Corrected console colour usage: Print the colours to the correct |
channel |
channel |
* Made tput (coloured console output) optional (AFAIK should be present in |
any sane system though). |
any sane system though). |
* FEATURE: Funky modes (more to come...): Polaroid, Film (rough, initial, |
version), Photoframe and Random colours/fonts. (see --help) |
version), Photoframe and Random colours/fonts. (see --help) |
* INTERNAL: Use /dev/shm as base tempdir if possible |
* BUGFIX: Fixed safe_rename(): Don't assume current dir, added '--' to mv |
* Added workaround for ffmpeg arguments order |
223,16 → 282,16 |
* INTERNAL: guess_aspect() doesn't operate globally |
* Reorganized help by alphabetical/rarity order |
* FEATURE: Full milliseconds support (actually, full decimal point seconds), |
timecode format extended to support e.g. 3m.24 (which means 00:03:00.240) |
timecode format extended to support e.g. 3m.24 (which means 00:03:00.240) |
* BUGFIX/FEATURE: The number of extended captures is rounded to match the |
standard columns (extended width matches standard) |
standard columns (extended width matches standard) |
* Made FOURCCs list case sensitive (the list has grown enough that I no |
longer see a benefit in being ambigous) |
longer see a benefit in being ambigous) |
* Added codec ids for On2's VP3, VP4, VP5 and VP6, TechSmith Screen Capture |
Codec (Camtasia's) and Theora, expanded list of FOURCCs of Indeo's |
codecs. |
Codec (Camtasia's) and Theora, expanded list of FOURCCs of Indeo's |
codecs. |
* Added -E / --end_offset / $DEFAULT_END_OFFSET, used to eliminate some |
seconds from the end |
seconds from the end |
|
1.0.6b: (2007-04-21) (1.4.1, Bugfix release) |
* BUGFIX: Use mktemp instead of tempfile (Thanks to 'o kapi') |
247,40 → 306,40 |
* FEATURE: Added -U (--fullname) |
* Requirements detection now prints all failed requirements |
* BUGFIX: (Regression introduced in 1.0.4b) Fail if interval is longer |
than video |
than video |
* Don't print the success line unless it was really successful |
* Allow quiet operation (-q and -qq), and different verbosity levels |
(only through config overrides) |
(only through config overrides) |
* Print vcs' identification on operation |
* FEATURE: Auto aspect ratio (-A, --autoaspect) |
* INTERNAL: Added better documentation of functions |
* Print coloured messages if possible (can be disabled by overriding |
$plain_messages) |
$plain_messages) |
* FEATURE: Command line overrides (-O, --override) |
* BUGFIX: Don't allow setting -n0 |
* Renamed codec ids of WMA2 (to WMA8) and WMA3 (to WMA9) |
* Changed audio codec ids from MPEG-1 to MPEG, as there's no difference, |
from mplayer's identification at least, between MPEG-1 and MPEG-2 |
from mplayer's identification at least, between MPEG-1 and MPEG-2 |
* Audio identified as MP2 can also actually be MP1, added it to the codec id |
* Added codec ids for: Vorbis, WMA7/WMA1, WMV1/WMV7, PCM, DivX ;), |
OpenDivX, LAVC MPEG-4, MSMPEG-4 family, M-JPEG, RealVideo family, I420, |
Sorenson 1 & 3, QDM2, and some legacy codecs (Indeo 3.2, Indeo 5.0, |
MS Video 1 and MS RLE) |
OpenDivX, LAVC MPEG-4, MSMPEG-4 family, M-JPEG, RealVideo family, I420, |
Sorenson 1 & 3, QDM2, and some legacy codecs (Indeo 3.2, Indeo 5.0, |
MS Video 1 and MS RLE) |
* Print the number of channels if != 2 |
|
1.0.4b: (2007-04-17) (1.3) |
* Added error checks for failures to create vidcap or to process it |
convert |
convert |
* BUGFIX: Corrected error check on tempdir creation |
* BUGFIX: Use temporary locations for temporary files (thanks to |
Alon Levy). |
Alon Levy). |
* Aspect ratio support (might be buggy). Requires bc. |
* Added $safe_rename_pattern to allow overriding the default alternate |
naming when the output file exists |
naming when the output file exists |
* Moved previous previous versions' changes to a separate file. |
* Support for per-dir and system-wide configuration files. Precedence |
in ascending order: |
/etc/vcs.conf ~/.vcs.conf ./vcs.conf |
in ascending order: |
/etc/vcs.conf ~/.vcs.conf ./vcs.conf |
* Added default_options (broken, currently ignored) |
* BUGFIX: (Apparently) Corrected the one-vidcap-less/more bug |
* Added codec ids of WMV9 and WMA3 |
303,7 → 362,7 |
* More flexible timestamp format (now e.g. 1h5 is allowed (means 1h 5secs) |
* BUGFIX: Discard repeated timestamps |
* Added "set -e". TODO: Add more verbose error messages when called |
programs fail. |
programs fail. |
* Added basic support for a user configuration file. |
|
1.0a: (2007-04-10) (1.0) |
311,7 → 370,7 |
* Put vcs' url in the signature |
* Use system username in signature |
* Added --shoehorn (you get the idea, right?) to feed extra commands to |
the cappers. Lowelevel and not intended to be used anyway :P |
the cappers. Lowelevel and not intended to be used anyway :P |
* When just a vidcap is requested, take it from the middle of the video |
* Added -H|--height |
* Added codec ids of WMV8 and WMA2 |
326,3 → 385,5 |
0.5a: * First usable version |
0.1: * First proof of concept |
|
# vim:set ts=3 sw=3 et textwidth=80: # |
|